How to Revive Your Deck 

Wood decks, like most surfaces outdoors, do require proper maintenance and care. The technique is to keep ahead with preventive maintenance. Generally, outdoor materials have 3 adversaries: water, dirt and sunlight (ultraviolet light). Protect your deck from these three and it will look as elegant, beautiful and new as ever. 


Let us assume you have not been diligent and things appear to be worse. Here are some processes which will help you revive your deck according to professional 

  1. Examine and Repair

The first step in order to revive your deck is to pause for a break and examine the decking for protruding or missing screws or nails. Stroll beneath the wood surface any fasteners which might be poking up and change those which are missing. If the planks are twisted or tangled, straighten them up by any means or methods in a correct manner. 

  1. Clean

While we might not see it, dust, dirt and carbon from car exhaust are airborne molecules that, as time passes, will settle on any outdoor surfaces. It is always amazing how much a wooden deck can look better with just a simple dusting and cleaning. Any detergent or cleaning agent can be used however, the best among is trisodium phosphate or TSP oftentimes available from most home improve centers, hardware stores and paint retailers. Just follow the container guidelines and mix it with warm water. Wet your deck and the vegetation around with a garden hose. Afterwards, apply the cleaning agent into the surface with your long-handled scrub brush then rinse. In addition to that, add one cup of chlorine bleach powder to the cleaning agent if you see evidences of algae on your deck. 

In some instances, a power washing which increases water pressure to 1,500 psi or greater can finish both brightening and cleaning in a single step. Nevertheless, this same water jet can depict some species of lumber if the nozzle head is held too near. You will usually want to maintain the tip to a distance between 12 to 18 inches away from the deck surface. Furthermore, it is also recommended to limit the pressure of water to 1,00 psi as well as the use of a nozzle spray angling between 25 to 40 degrees. Maintain movement and do a sweeping motion. 

  1. Brighten

Although your deck surface may be clean, sometimes, it can still appear a bit discolored and dinghy from staining or sunlight (ultra violet light from the sun can have an oxidizing result on wood which causes it to change color). There are a lot of deck brighteners available but the addition of oxalic acid (powdered bleach) and a warm water is highly recommended. Just make precautionary measures like wearing of eye protection and rubber gloves. Wet first the deck surface then you apply the mixture using a long-handled brush. 

  1. Seal

The last step to revive the deck is to maintain a clean and bright surface. Apply a quality deck sealer in order to maintain it the way it should be for a longer period of time. The sealer prevents your wood deck from saturating with water and it also interrupts the process by not allowing the water from penetrating the surface. It also potentially blocks ultraviolet light.

Leave a Reply

Your email address will not be published. Required fields are marked *